Home page » News » The new THUNDER amps are available
Other Mitek Sites
MTX USA
MTX Europe
MTX Germany
COUSTIC USA
COUSTIC Europe
Xtant USA
Xtant Europe
StreetWires USA
StreetWires Europe
Mitek USA
Mitek Europe
Re-Q

The new THUNDER amps are available

New products

November 03, 2008

THUNDER is the high-end MTX amplifier line. 5 Amps are available : three ClassD mono block, one 2ch and one 4ch.

- TH4000D
Specifications :
• Mono block class-D amplifier
• CEA2006 certified Power Output :
- 4000 watts RMS x 1-channel at 1 ohm and THD+N ≤1%
- 2200 watts RMS x 1-channel at 2 ohm and THD+N ≤1%
- 1250 watts RMS x 1-channel at 4 ohm and THD+N ≤1%
• Crossover :
- Low pass 24dB/oct variable from 40Hz to 200Hz
- Subsonic filter 24dB/oct variable from 20Hz to 50Hz
• Signal-to-Noise Ratio (1 watt) : > 65dB
• THD+Noise (Distortion) (1 watt) : ≤ 0,5%
• Frequency Response (±0,5dB) : 20Hz-200Hz
• Maximum Input Signal : 6V
• Maximum Sensitivity : 100mV
• Dimensions : 586mm x 213mm x 52,5mm
• Phase switch 0° or 180°
• High level inputs with Smart Engage Technology
• EBC remote control
• Bridged mode with gain management


- TH1500D
Specifications :
• Mono block class-D amplifier
• CEA2006 certified Power Output :
- 1500 watts RMS x 1-channel at 1 ohm and THD+N ≤1%
- 1000 watts RMS x 1-channel at 2 ohm and THD+N ≤1%
- 500 watts RMS x 1-channel at 4 ohm and THD+N ≤1%
• Crossover :
- Low pass 24dB/oct variable from 40Hz to 200Hz
- Subsonic filter 24dB/oct variable from 20Hz to 50Hz
• Signal-to-Noise Ratio (1 watt) : > 68dB
• THD+Noise (Distortion) (1 watt) : ≤ 0,5%
• Frequency Response (±0,5dB) : 20Hz-200Hz
• Maximum Input Signal : 6V
• Maximum Sensitivity : 100mV
• Dimensions : 485mm x 213mm x 52,5mm
• Phase switch 0° or 180°
• High level inputs with Smart Engage Technology
• EBC remote control
• Bridged mode with gain management


- TH800D
Specifications :
• Mono block class-D amplifier
• CEA2006 certified Power Output :
- 800 watts RMS x 1-channel at 2 ohm and THD+N ≤1%
- 400 watts RMS x 1-channel at 4 ohm and THD+N ≤1%
• Crossover :
- Low pass 24dB/oct variable from 40Hz to 200Hz
- Subsonic filter 24dB/oct variable from 20Hz to 50Hz
• Signal-to-Noise Ratio (1 watt) : > 78dB
• THD+Noise (Distortion) (1 watt) : ≤ 0,5%
• Frequency Response (±0,5dB) : 20Hz-200Hz
• Maximum Input Signal : 6V
• Maximum Sensitivity : 100mV
• Dimensions : 383mm x 213mm x 52,5mm
• Phase switch 0° or 180°
• High level inputs with Smart Engage Technology
• EBC remote control


- TH902
Specifications :
• 2-Channel Class-AB Amplifier
• CEA2006 certified Power Output :
- 150 watts RMS x 2-channels at 2 ohm and THD+N ≤1%
- 90 watts RMS x 2-channels at 4 ohm and THD+N ≤1%
- 300 watts RMS x 1-channel at 4 ohm and THD+N ≤1%
• Crossover :
- High pass 12dB/oct variable from 40Hz to 8000Hz
- Low pass 12dB/oct variable from 40Hz to 8000Hz
- Band pass 12dB/oct variable from 40Hz to 8000Hz
• Signal-to-Noise Ratio (1 watt) : > 81dB
• THD+Noise (Distortion) (1 watt) : ≤ 0,1%
• Frequency Response (±1dB) : 20Hz-20000Hz
• Maximum Input Signal : 6V
• Maximum Sensitivity : 100mV
• Dimensions : 332mm x 213mm x 52,5mm
• High level inputs with Smart Engage Technology


- TH904
Specifications :
• 4-Channel Class-AB amplifier
• CEA2006 certified Power Output :
- 150 watts RMS x 4-channels at 2 ohm and THD+N ≤1%
- 90 watts RMS x 4-channels at 4 ohm and THD+N ≤1%
- 300 watts RMS x 2-channels at 4 ohm and THD+N ≤1%
• Crossover :
- High pass 12dB/oct variable from 40Hz to 8000Hz
- Low pass 12dB/oct variable from 40Hz to 8000Hz
- Band pass 12dB/oct variable from 40Hz to 8000Hz
• Signal-to-Noise Ratio (1 watt) : > 81dB
• THD+Noise (Distortion) (1 watt) : ≤ 0,25%
• Frequency Response (±1dB) : 20Hz-20000Hz
• Maximum Input Signal : 6V
• Maximum Sensitivity : 100mV
• Dimensions : 383mm x 213mm x 52,5mm
• High level inputs with Smart Engage Technology

High definition picture are available here




Follow-up of the site's activity RSS 2.0 | Site Map | Private area